碳鋼冷凝器是采用碳鋼（Q235）製成，由驅動裝置、攪拌係統、密封部件、筒體、加熱或冷卻裝置、支撐部件、各用途的管口等組成。碳鋼冷凝器的工作原理：需要進行混合與反應的各類介質按比例配方進入碳鋼冷凝器中，在一定的溫度範圍內配以攪拌係統的外力作用，讓原材料轉變成目標物即需要得到的產物。攪拌器：混合反應是碳鋼冷凝器的核心技術，攪拌操作涉及流體的流動、傳熱和傳質。攪拌器有低粘度攪拌器與高粘度攪拌器，槳式、開啟渦輪式、圓盤渦輪式、推進式為低粘度攪拌器；高粘度攪拌器有螺帶式、螺旋槳式、框式、錨式及我公司最新開發的刮壁式攪拌器。
Workingprinciple of carbon steel reaction kettle:The need for mixing andreaction of many kinds of media according to the proportion of formula intocarbon steel reactor, within a certain range of temperature with stirringsystem of external force, into the object to get the product to make conversionof raw materials. Carbon steel reactor is madeof carbon steel (Q235), is composed of a driving device, a stirring system,sealing components, a cylinder, a heating or cooling device, a support member,by application of the nozzle and other components
Mixer: the mixed reaction isthe core technology of the carbon steel reactor www.gfanyingfu.com, which involves the flow, heattransfer and mass transfer of the fluid. Stirrer has low viscosity mixer withhigh viscosity mixer and paddle type, open type turbine, disk turbine type,push type mixer with low viscosity, high viscosity mixer with ribbon type,propeller type, box type, anchor type and my company the latest development ofwall scraping stirrer.
傳熱方式：外置夾套、內置盤管為最常用的加熱或冷卻方式。加熱方式分電加熱、導熱油循環加熱、蒸汽加熱、遠紅外加熱等，不同的工藝條件、不同的熱源方式選用不同的加熱方式。
Heat transfer mode: externaljacket, built-in coil for the most commonly used heating or cooling methods.Heating method is divided into electric heating, heat conduction oilcirculation heating, steam heating, far infrared heating, etc., differentprocess conditions, different heat source mode selection of different heating methods.
密封形式：真空度高或壓力相對較高時為機械密封，一般情況下用填料密封即可。
Seal form: high vacuum orhigh pressure or high pressure for the mechanical seal, the general situationwith packing seal can be.
安裝形式：放置於操作平台當中用耳式支座；作為單機設備使用直接安裝於地麵時即用支撐式或腿式支座。無論哪類安裝形式都要求水平度。
Installation form: placed inthe operating platform which uses ear type bearings; as a stand-alone equipmentused directly installed on the ground when the support or leg support. Nomatter what type of installation is required for the level of.
